METREL Test Adapter for Charging Stations

Delivery time: 1-3 working days, Express: next working day if ordered until 2 p.m.
  • METREL A 1532 EVSE Test Adapter for Charging Stations
  • Including type 2 plug for connection to the charging station
  • Charging voltage indicator
  • Control Pilot (CP) rotary switch to simulate vehicle status
  • Proximity Pilot (PP) rotary switch to simulate the presence of the EV cable and current detection
  • Socket outlet for connection to the installation tester
  • Can be combined with the METREL installation tester

Test the Operational Safety of Your Charging Stations

The METREL A 1532 test adapter is specifically designed for testing charging stations. It is the perfect accessory for METREL test instruments. Whether you want to carry out safety tests or function tests on charging stations with Mode 3 and Type 2 plugs, this adapter is the perfect solution for both applications.

Charging Status Simulation

The CP rotary switch on the adapter can be used to simulate the status of the electric car, and the PP rotary switch to simulate the presence of the EV cable and current detection.

Wide Range of Applications

Use the instrument to carry out on-site inspections of charging station installations: For initial and repeat inspections as well as testing private, semi-private and public charging stations.

Function Test & Reporting

In combination with the METREL EurotestXC MI 3152 or the EurotestXD MI 3155, you can create professional test reports in MESM (the licence for the MESM software must be purchased separately). In addition, the instruments can check the entire charging station at the touch of a button using the AUTO SEQUENCE® feature.

METREL – Leading Manufacturer of Measuring Instruments

With more than 70 years of experience in the field of electrical measuring instruments, Metrel develops, manufactures and tests all of its products at its plant in Ljubljana. The instruments are sold in more than 70 countries, with special importance always placed on innovation, reliability and precision.

Delivery includes:

  • METREL test adapter A1532
  • Padded carrying case
  • Operating instructions

Technical specifications:

METREL test adapter A1532

Input voltage

400 V (3-phase)


50 Hz

Test current

13 A

Proximity Pilot (PP) Simulation

Open circuit: 13 A, 20 A, 32 A, 63 A

Control Pilot (CP) Simulation

Position A (not connected)
Position B (connected, not charging)
Position C (charging without cooling)
Position D (charging with cooling)
Position E (fault - CP short-circuited to PE)

Overvoltage category

300 V CAT II

Protection class

IP 40

Degree of contamination


Protection class

Double insulation


3000 m above sea level

Dimensions (L x W x H)

200 x 100 x 70 mm

Test cable length

0.5 m


0.82 kg

Working temperature range

0 °C to 40 °C; 95% RH; non-condensing

Storage temperature range

-10 °C to +70 °C

Maximum humidity for storage

90% RH (-10 °C to +40 °C); 80% RH (40 °C to 60 °C)

Any other questions?

Our knowledge centre can tell you everything you need to know about charging your electric car.For example, you can visit the centre for advice on what to look out for when buying and installing a charging station.


More Information
Manufacturer METREL
Write Your Own Review
You're reviewing:METREL Test Adapter for Charging Stations
Your Rating


Default Category

Customer Questions & Answers
No Questions
Please, mind that only logged in users can submit questions
Recently Viewed
No recently views items
Clear All