NRGkick connector attachment set standard (EU)

All NRGkick connector attachments are equipped with temperature monitoring—at each individual phase pin. The connector attachment for domestic sockets has dual temperature monitoring on both pins. As a result, your NRGkick can precisely detect if a poorly installed socket is creating excess heat and can avoid hazardous situations before they occur. If the socket becomes too hot, the NRGkick regulates the charging current with full autonomy.

If a charging unit is disconnected from the energy supply while charging is in progress, dangerous electric arcs are created that can damage the contacts. The functionality of the NRGkick connector attachments and the patented safety connector system fully eliminates the risk of electric arcs being produced when the connector attachment is disconnected from the connector unit—it is the only charging unit on the market to interrupt the current flow before the contacts are separated!

NRGkick connector attachments lock into place safely and perceptibly—so there is no risk of accidental disconnection. At the same time, the surface of the connector system, with soft components and good grip, ensures that you can remove and change the connector attachments quickly and easily as needed.

The connector attachments are detected and identified by NRGkick fully autonomously. This ensures that the charging current does not exceed the maximum value that is permitted for the particular connector attachment. National regulations are naturally also taken into account, for example those stating that the charging current must not exceed a specific value when a domestic socket attachment is used for charging.

Our knowledge center contains everything you need to know about charging your electric car. For example, what you should bear in mind when purchasing and installing a charging station.