RFID cards (5-Pack)

1. Hold the RFID master card in front of the RFID sensor and wait until you hear a beep. This activates the programming mode.
2. Hold the other RFID card in front of the RFID sensor within five seconds, and wait until you hear another beep.
3. To complete the process, you must hold the RFID master card in front of the sensor for another five seconds. The additional RFID user card is now activated.

Have you lost one of your RFID charge cards and want to reset the rest? Here's how to do so:

1. Remove the cover and then open the charging station's connection panel. To do this, remove the four screws that secure the connection panel.
2. Hold down the [Service button] for five seconds. This deletes all the RFID cards (including the master card).
3. Start programming the RFID Master Card again.

The first RFID card to be detected by the charging station will be automatically stored as an RFID master card. To program it:

1. Hold the RFID card in front of the RFID sensor and wait until you hear a beep.
2. The RFID master card is now programmed.